Emax TINYHAWK III - Page 11

6. Micro USB
7. Recording indicator
8. Charging indicator
9. Antenna
10. Auto Channel Search Button
11. Turn on/off (long press) & menu button (short press)
12. Reset switch
13. Micro SD card slot
14. Eye Distance Adjustment
15. Sponge pad
16. Tripod Screw Mount
In order to operate Transporter 2 correctly, you need to do the following:
1. Install the included antenna on the SMA connector.
2. Please extend the antenna and check the goggle is fully charged when putting them on.