Need help?Do you have a question about the Emax Tinyhawk and is the answer not in the manual?
General| Camera | 600TVL CMOS |
|---|---|
| Wheelbase | 75mm |
| Frame Size | 75mm |
| Motor Size | 0802 |
| Propeller Size | 40mm |
| FPV Camera | 600TVL CMOS |
| Motors | 0802 |
| Video Transmitter | 25mW |
| Propellers | Emax Avan Micro |
| Receiver | FrSky D8 |
| VTX | 25mW |
| Flight Time | 4 minutes |
| Receiver Type | FrSky D8 |
| Flight Controller | F4 (MATEKF411RX Firmware) |
| Battery | 1S 450mAh LiPo |
Product not for under 18; adult supervision recommended for minors.
Avoid use if ill, fatigued, or under influence; fly in safe areas.
Do not use in harsh environments or with unapproved parts.
EMAX disclaims liability; visit website for support.
Technical specifications for the Tinyhawk drone.
Technical specifications for the radio transmitter.
Technical specifications for the FPV goggles.
List of all items included in the Tinyhawk package.
Diagram identifying key components of the Tinyhawk drone.
Diagrams of radio transmitter and goggle interfaces.
Information on the radio's battery and charging procedure.
How to power the radio on and bind it to the Tinyhawk.
How to adjust trim for stable flight control.
Procedure for calibrating the radio transmitter gimbals.
Information on the goggle battery and charging.
Attaching antennas and connecting power for goggle use.
How to power goggles and manually select video channels.
Using auto scan to find the best video reception channel.
Adjusting brightness, contrast, and saturation via menu.
Explanation of how radio sticks control aircraft movement.
Diagram showing the functions of the left radio stick.
Diagram showing the functions of the right radio stick.
Powering on and preparing Tinyhawk for flight.
Flight time limits and battery voltage for landing.
How to arm and safely disarm the Tinyhawk.
How to select different flight modes using the radio switch.
Descriptions of flight modes controlling aircraft angle limits.
Guidance for practicing line of sight and FPV flying.
Understanding OSD, battery, and using the beeper.
Correct orientation and mounting of propellers.
Steps for safely removing propellers.
Procedure for entering and changing VTX settings.
Entering and adjusting VTX band, channel, and power.
Notice on SmartAudio and potential video display issues.
Visual guide for VTX settings navigation using button presses.
Instructions for unlocking advanced VTX features.
Channel frequency map for unlicensed users.
Channel frequency map for HAM licensed users.
User responsibility regarding VTX license and regulations.
Steps to enter the OSD parameter adjustment menu.
Setting VTX BAND, CHAN, and POWER via OSD.
Diagram showing the Tinyhawk's main electronic board components.
Details on the receiver and steps for binding.
Technical specifications of the F4 flight controller.
Default configuration and channel mapping of the FC.
Using PID and Rate profiles for flight tuning.
Using Betaflight Configurator for settings and firmware updates.
Disclaimer on changing PID settings or firmware.
Entering DFU mode and selecting firmware for flashing.
The process of flashing new firmware to the flight controller.
Applying settings using a CLI Dump File in Betaflight.
Copying text from the CLI dump file.
Pasting commands into the Betaflight CLI command bar.
Reminder to pay attention to surroundings and age restrictions.
To Next Page
