NOTE:
• Control testing results are flagged by ctl on the bottom left corner of
the display screen in addition to mem .
• When the meter memory is blank, the display screen will show nil.
• When there are no day average data available, the display screen
will show 4 dashes.
• If the meter memory is full, adding a new test result will cause the
oldest one to be deleted.
• Stored test results and day averages will not be erased when chang-
ing batteries.
• You can begin testing anytime by inserting a test strip.
Embrace N0 Code
Viewing Your Meter’s Memory
38
To Next Page
Loading...
