Blood Glucose Monitoring System
13
passing the 12 this will change (AM to PM) or (PM to
AM). When the desired hour and AM or PM is reached
press and release the middle button to set the correct
hour and if it’s AM or PM.
Step 8: Set Minutes:
The current minutes will ash. If the talking feature
is on, the Monitor will say, “Set Minutes”. Press and
release the top or bottom button to the desired minute.
Press and release middle button to set the minutes.
• Anytime during set up, inserting a Embrace TALK
Test Strip will begin testing. Any changes made so
far will be stored.
• You may need to reset the Year, Date and Time after changing the
batteries.
After date and time have been set, the monitor will announce the
year, date and time if the talking feature is on. Begin testing by
inserting an Embrace TALK Blood Glucose Test Strip (see page 29,
Testing Your Blood Glucose), or press and hold the middle button
to turn off the monitor, or see the next section on how to set up the
alarm feature on your monitor.
To Next Page
Loading...
