EMC VNX VNX5200 User Manual


Unpack your systemUnpack your system
99
Unpack your systemUnpack your system
Unpack and install the DPE first. Other storage (DAEs) will be unpacked, assembled, and cabledUnpack and install the DPE first. Other storage (DAEs) will be unpacked, assembled, and cabled
later.later.
Unpacking the Disk Processor Enclosure (DPE)Unpacking the Disk Processor Enclosure (DPE)
You You will have rwill have received yeceived your system eour system either fully asither fully assembled and sembled and cabled in an cabled in an EMC cabinet, EMC cabinet, or inor in
shipping boxes to be unpacked and installed into your own cabinet.shipping boxes to be unpacked and installed into your own cabinet.
Note:Note:
If your system includes the use of If your system includes the use of 4U DAEs, they are not customer-installab4U DAEs, they are not customer-installable. They willle. They will
arrive either installed in an EMC cabinet fully assembled or in separate shipping boxes and willarrive either installed in an EMC cabinet fully assembled or in separate shipping boxes and will
need to be installed by service personnel.need to be installed by service personnel.
If your system was shipped fully assembled and cabled in an EMC If your system was shipped fully assembled and cabled in an EMC cabinet:cabinet:
1.1. FollFollow the unow the unpacpacking inking instrucstructiontions on the outss on the outside of the boide of the box.x.
2.2. Go Go didirerectctly ly toto “Cable y
“Cable your system” on our system” on pagepage 1919of this installation guide to verify the cabling.of this installation guide to verify the cabling.
If your system was shipped in If your system was shipped in separate boxeseparate boxes and needs s and needs to be assembled in your own to be assembled in your own cabinet:cabinet:
1.1. Verify thVerify that you have rat you have received aleceived all of the DPE col of the DPE components, includmponents, including cableing cables, bezel, rs, bezel, rail kit, andail kit, and
mounting screws.mounting screws. Fig
Figururee 1 o1 on pn pageage 1010shows the shows the shipping contents.shipping contents.

EMC VNX VNX5200 Specifications

General

Model	VNX5200
Category	Network Hardware
Maximum Drives	125
RAID Support	RAID 0, 1, 5, 6, 10
Form Factor	2U
Storage Processor	Dual
Drive Types	SAS, SSD
Connectivity	Fibre Channel, iSCSI, FCoE
Redundancy	Yes
Storage Type	Block and File
Operating System	VNX Operating Environment