EMC VNX VNX5200 User Manual


Power upPower up
2121
Power upPower up
Before you power upBefore you power up
Ensure that all cabinet circuit breakers are in the On position, all necessary PDU switches areEnsure that all cabinet circuit breakers are in the On position, all necessary PDU switches are
switched on, and power is switched on, and power is connected.connected.
Connecting or verifying power Connecting or verifying power cablescables
The power cables are conveniently color-coded. Two colors identify the different zones (PDUs).The power cables are conveniently color-coded. Two colors identify the different zones (PDUs).
Black power cableBlack power cables connect to PDU s connect to PDU B, while gray power cables connect to PDU A.B, while gray power cables connect to PDU A.
1.1. ConConnect SP pnect SP power A tower A to poweo power distr distriburibution untion unit (PDUit (PDU) A.) A.
2.2. CoConnnnect Sect SP poP power wer B to PB to PDU BDU B..
3.3. Lock eLock each poweach power cable r cable in placin place. Dress e. Dress the cables the cables as appropas appropriate.riate.
Wait 15 minutes for the system to power up completely.Wait 15 minutes for the system to power up completely.
4.4. MoniMonitor thtor the syse system atem as it pos it powers wers up. up. SeeSee “Ver
“Verifying system statifying system status” on pageus” on page 2222for informationfor information
on what to look on what to look for.for.
FiguFigurere 1010
Connecting DPE power cablesConnecting DPE power cables
AA
BB
PDU BPDU B
AACC
DDCC
!!
AACC
AA
PDU APDU A

AA
BB

EMC VNX VNX5200 Specifications

General

Model	VNX5200
Category	Network Hardware
Maximum Drives	125
RAID Support	RAID 0, 1, 5, 6, 10
Form Factor	2U
Storage Processor	Dual
Drive Types	SAS, SSD
Connectivity	Fibre Channel, iSCSI, FCoE
Redundancy	Yes
Storage Type	Block and File
Operating System	VNX Operating Environment