EMC VNX5300 - Page 70

EMC® VNX5300™ Hardware Information Guide
70
EMC® VNX5300™ Hardware Information Guide
Table 43 lists the 6-Gb/s SAS port pin signals used on the connector.
6-Gb/s SAS port LEDs and port direction (input or output)
Figure 67 shows the 6-Gb/s SAS port LED—a bi-color (blue/green) LED next to the
connector, either left or right—that indicates the link/activity of the SAS port.
Note: Looking from the rear of the 2U, DAE, LCC B is located on the left and LCC A is located
on the right (Figure 67).
Figure 67 6-Gb/s SAS port LED
Table 43 6-Gb/s SAS port connector pinout
Pin Signal Pin Signal
A1 GND B1 GND
A2 Rx 0+ B2 Tx 0+
A3 Rx 0- B3 Tx 0-
A4 GND B4 GND
A5 Rx 1+ B5 Tx 1+
A6 Rx 1- B6 Tx 1-
A7 GND B7 GND
A8 Rx 2+ B8 Tx 2+
A9 Rx 2- B9 Tx 2-
A10 GND B10 GND
A11 Rx 3+ B11 Tx 3+
A12 Rx 3- B12 Tx 3-
A13 GND B13 GND
6 Gb SAS
X4
#
Latch handle
X4
Link LED
VNX-000274
6 Gb/s SAS port