EMC VNX5300 - Page 72

EMC® VNX5300™ Hardware Information Guide
72
EMC® VNX5300™ Hardware Information Guide
IMPORTANT
!
You can add or remove a disk drive while the DAE is powered up, but you should
exercise special care when removing disk drives while they are in use. Disk drives
are extremely sensitive electronic components.
Figure 69 Example of LCC B enclosure ID and bus ID
Table 45 describes the bus (loop) status LEDs.
6 Gb SAS
X4
#
X4
Bus (loop) ID
LCC enclosure ID
VNX-000277
Table 45 LCC bus (loop) status LEDs
Led Color State Description
Power fault Amber On Fault
— Off No fault or power off
Power on Green On Power on
—OffPower off