Emcee 1152 - Page 3

DIGITAL CONDUCTIVITY METER
The information contained in the accompanying document is proprietary and confidential, and may not be
copied in any manner whatsoever without prior written consent of Emcee Electronics, Inc. The document
and the material therein may not be used for any purpose other than that intended by Emcee Electronics,
Inc.
COPYRIGHT 1984 EMCEE ELECTRONICS, INC.
REVISION DATE: JANUARY 10, 2019
Page 3 of 20
TABLE OF CONTENTS Page No.
11.0 Warnings and Markings . . . . . . . . . . . . . . 13
12.0 Photographs
Figure 1 1152 with Probe attached . . . . . . . 16
Figure 2 Probe Calibration Number . . . . . . 17
Figure 3 Zero Check . . . . . . . . . . . . . . . . . . 18
Figure 4 Calibration Check . . . . . . . . . . . . . 19
Figure 5 Fuel Evaluation . . . . . . . . . . . . . . . 20
Figure 6 Conductivity Meter with Cable
Reel attached . . . . . . . . . . . . . . . . . 21
Figure 7 Battery Replacement . . . . . . . . . . . 22
Service & Warranty Policy
See Emcee Electronics, Inc Service and Warranty Manual