DIGITAL CONDUCTIVITY METER
The information contained in the accompanying document is proprietary and confidential, and may not be
copied in any manner whatsoever without prior written consent of Emcee Electronics, Inc. The document
and the material therein may not be used for any purpose other than that intended by Emcee Electronics,
Inc.
COPYRIGHT 1984 EMCEE ELECTRONICS, INC.
REVISION DATE: JANUARY 10, 2019
Page 5 of 20
2.0 SIGNIFICANCE
Fuel products such as jet and diesel fuels
which are loaded at high pumping rates,
develop a static charge. The Emcee
Conductivity Meter measures the ability of
the fuel to dissipate that charge.
3.0 DEFINITION
The Emcee Conductivity Meter reads
conductivity in picosiemens/meter which
are equivalent to CU or Conductivity
Units.
4.0 SUMMARY OF METHOD
The Emcee Conductivity Meter uses a probe
consisting of two concentric stainless steel
electrodes. When the probe is immersed in
fuel, a constant voltage is applied to the
electrodes. This results in an electrical
current which is amplified and indicated on
the meter.
To Next Page
Loading...