Emec LDPHCL - Calibration Parameters

SET-POINT pH-Cl
ESC
Passcode
OK
0
0
0
0
Main Menu
Set-Point
Calibration
Parameters
Set-Point Menu
Set Ch1 pH pulse 1
Set-Point Menu
Set Ch1 pH relay
Set Ch1 pH pulse 1
Mode: ON/OFF
Mode: OFF
Mode: Prop.
Mode: Fixed PWM
Mode: Proportional PWM
Mode: ON/OFF
Mode: OFF
Working Mode: PID
STANDARD VERSION PLUS VERSION
Set Ch1 Cl2 pulse 2
Set Ch1 Cl2 relay
Mode: Prop.
Mode: Fixed PWM
Mode: Proportional PWM
Mode: Prop. + WM
Mode: LINE