October 2014
6
Quick Start Guide
b. Right click to select Properties.
c. Select Internet Protocol (TCP/IP), then select the Properties button.
Note
If the PC/laptop is from another network, record the current IP address and other settings so the
PC/laptop can be returned to the original network after the Gateway has been configured.
d. Select the Use the following IP address button
e. In the IP address field, enter 192.168.1.12.
f. In the Subnet mask field, enter 255.255.255.0.
g. Select OK for both the Internet Protocol (TCP/IP) Properties window and the
Local Area Connection Properties window.
Note
Connecting to the Gateway's secondary Ethernet port will require different network settings.
3. Disable proxies.
a. Open a standard web browser
b. Navigate Tools>Internet Options>Connections>LAN Settings
c. Under Proxy server, uncheck the Use a proxy server... box.
Table 1. TCP/IP Network Settings
Gateway PC/laptop Subnet
Ethernet 1 192.168.1.10 192.168.1.12 255.255.255.0
Ethernet 2 192.168.2.10 192.168.2.12 255.255.255.0
00825-0200-4410_CA.fm Page 6 Thursday, October 16, 2014 6:44 PM
To Next Page
Loading...
