October 2014
8
Quick Start Guide
2. Navigate to Setup>Ethernet Protocol>Address to enter the Network Settings.
a. Configure a static IP Address or set for DHCP and enter a Hostname
.
b. Restart application at Setup>Restart Apps.
Note
Resetting applications will temporarily disable communications with field devices.
3. Disconnect the power and Ethernet cable from the Gateway.
Table 2. Network Settings
Gateway PC/laptop Subnet
Ethernet 1 192.168.1.10 192.168.1.12 255.255.255.0
Ethernet 2 192.168.2.10 192.168.2.12 255.255.255.0
00825-0200-4410_CA.fm Page 8 Thursday, October 16, 2014 6:44 PM
To Next Page
Loading...
