6 Software installation (optional)
The 2-disk software pack contains the Security Setup Utility (only required
for secure host connections or OPC communications) and AMS Wireless
Configurator. The Security Setup Utility is located on Disk 1. To install the
software:
Procedure
1. Exit/close all Windows programs, including any running in the
background, such as virus scan software.
2. Insert Disk 1 into the CD/DVD drive of the PC.
3. Follow the prompts.
AMS Wireless Configurator is located on Disk 2. To install the
software:
4. Exit/close all Windows programs, including any running in the
background, such as virus scan software.
5. Insert Disk 2 into the CD/DVD drive of the PC.
6. Select Install from the menu when the AMS Wireless Configurator
setup begins.
7. Follow the prompts.
8. Allow AMS Wireless Configurator to reboot PC.
9. Do not remove the disk from the CD/DVD drive.
Note
Installation will resume automatically after login.
10. Follow the prompts.
Note
If the autorun function is disabled on the PC, or installation does not
begin automatically, double click D:\SETUP.EXE (where D is the
CD/DVD drive on the PC) and select OK.
For more information about the Security Setup Utility and AMS
Wireless Configurator, see the Emerson Wireless Gateway Reference
Manual (document number 00809-0200-4420).
September 2020 Quick Start Guide
Quick Start Guide 21
To Next Page
Loading...
