7 Verify operations
Operation is verified through the web interface by opening a web browser
from any PC on the host system network and entering the Gateway IP
address or DHCP host name in the address bar. If the Gateway has been
connected and configured properly, the security alert will be displayed
followed by the log in screen.
Figure 7-1: Gateway Log In Screen
The Gateway is now ready to be integrated into the host system. If wireless
field devices were ordered with the Gateway, they were preconfigured with
the same network ID and join key information. Once the field devices are
powered, they will appear on the wireless network and communications can
be verified under the Explore tab using the web interface. The time needed
for the network to form depends on the number of devices.
Quick Start Guide September 2020
22 Emerson.com/Rosemount
To Next Page
Loading...
