Emerson AMS Wireless Vibration Monitor User Manual

Alert setup
Use this menu to configure the alert limits of the device variables. Each tab lets you
configure the units of each variable or set it back to the default values. All alerts are
configured from highest value to lowest value. Depending on the alert type, this may
mean the fail or the advise follows the range upper.
User Guide Configuration
MHM-97927-PBF August 2020
MHM-97927-PBF, Rev 1 33

Emerson AMS Wireless Vibration Monitor Specifications

General

Brand	Emerson
Model	AMS Wireless Vibration Monitor
Category	Monitor
Language	English