Emerson AMS Wireless Vibration Monitor - Radio Specifications; Device Variable Alert Limits

A.4 Radio specifications
Parameter Value
Frequency Band 2.4GHz - 2.4835GHz
Output Power +8dBm
Receiver Sensitivity -93dBm
Range 100m (outdoor +25 C, 50% RH)
A.5 Device variable alert limits
This table shows the alert limits of the device variables.
Table A-3: X Overall
Axis Severity Upper Limit Lower limit Unit Notes
X Overall Saturated 70 0 in/s Read-only
X Overall Sensor 70 0 in/s Read-only
X Overall Range 5 0 in/s Can be set by the user up to
the sensor range
X Overall Fail 1 Not
Applicable
in/s
X Overall Maint 0.35 Not
Applicable
in/s
X Overall Advise 0.14 Not
Applicable
in/s
Table A-4: Y Overall
Axis Severity Upper Limit Lower Limit Unit Notes
Y Overall Saturated 70 0 in/s Read-only
Y Overall Sensor 70 0 in/s Read-only
Y Overall Range 5 0 in/s Can be set by
the user up to
the sensor
range
Y Overall Fail 1 0 in/s
Y Overall Maint 0.35 0 in/s
Y Overall Advise 0.14 0 in/s
Table A-5: Z Overall
Axis Severity Upper Limit Lower Limit Units Notes
Z Overall Saturated 70 0 in/s Read-only
User Guide Specifications and reference data
MHM-97927-PBF August 2020
MHM-97927-PBF, Rev 1 67