Emerson AMS Wireless Vibration Monitor User Manual

associated software and the details of all the possibilities are beyond the scope of this
manual. This manual only indicates some of the general capabilities and version
requirements.
You can trend values in essentially any host that accepts Modbus or OPC inputs. Configure
OPC tags and Modbus registers for wireless devices in the Smart Wireless Gateway web
interface. Refer to the Smart Wireless Gateway User Manual for additional information.
The settings in the gateway and the host must be consistent and entered in both locations
(for example, Modbus register definitions).
Also, with AMS Machine Works and AMS Wireless Vibration Monitor devices (that are
licensed for the Advanced Diagnostics application), you can trend Energy Band parameters
and collect spectrum and waveform information.
User Guide Configuration
MHM-97927-PBF August 2020
MHM-97927-PBF, Rev 1 41

Emerson AMS Wireless Vibration Monitor Specifications

General

Brand	Emerson
Model	AMS Wireless Vibration Monitor
Category	Monitor
Language	English