Emerson Anderson Greenwood Type 443 - Soft Goods Repair Kits

25
7 SOFT GOODS REPAIR KITS
The kits listed below are available from stock.
Each kit contain all the seals and seats to
repair a main valve or pilot and any required
lubricants. Pilot kits also contain all the
seals and seats for field test and backflow
accessories. To order soft goods kits specify
the base number and select the last three
digits from the following tables. To ensure the
correct soft goods kit is ordered, specify the
7.1 Main valve – kit base number: 06.3365.XXX
TYPE 443/453
Material
1 x 2 1½ x 3* 2 x 3 3 x 4 4 x 6 6 x 8 8 x 10
1½ x 2
Urethane and 001 002 003 004 005 006 007
NBR seats,
NBR seals
Urethane and 012 013 014 015 016 017 018
FPM seats,
FPM seals
Urethane and 141 142 143 144 145 146 147
EPR seats,
EPR seals
* Also 1½ x 2 threaded valve with ‘G’ and ‘H’ orifice
TYPE 463
Material
1½ x 2 2 x 3 3 x 4 4 x 6 6 x 8 8 x 8 x 8 8 x 10 10 x 14
2 x 3 x 3 3 x 4 x 4 4 x 6 x 6 6 x 8 x 8 8 x 10 x 10
Urethane and 003 004 005 008 009 010 011 357
NBR seats,
NBR seals
Urethane and 014 015 016 019 020 021 022 358
FPM seats,
FPM seals
Urethane and 143 144 145 148 149 150 151 359
EPR seats,
EPR seals
TYPE 449/459
Material
1 x 2 1½ x 3* 2 x 3 3 x 4 4 x 6 6 x 8 8 x 10
1½ x 2
PTFE seat/seal 200 201 202 203 204 205 206
(set press., psig) (15-600) (15-600) (15-400) (15-400) (15-400) (15-275) (15-275)
PTFE seat/seal 211 212 213 214 215 216 217
(set press., psig) (601-1480) (601-1480) (401-1480) (401-1480) (401-1480) ( 601-1480) (276-1480)
* Also, 1½ x 2 threaded valve with G and H orifice
TYPE 469
Material
1½ x 2 2 x 3 3 x 4 4 x 6 6 x 8 8 x 8 x 8 8 x 10 10 x 14
2 x 3 x 3 3 x 4 x 4 4 x 6 x 6 6 x 8 x 8 8 x 10 x 10
PTFE seat/seal 202 203 204 207 208 209 210 362
(set press., psig) (15-400) (15-400) (15-400) (15-400) (15-275) (50-275) (15-275) (50-275)
PTFE seat/seal 213 214 215 218 219 220 221 363
(set press., psig) (401-1480) (401-1480) (401-1480) (401-1480) (276-1480) (276-1480) (276-1480) (276-1480)
ANDERSON GREENWOOD SERIES 400 PISTON PILOT POPRV
InstallatIon and MaIntenance InstructIons
valve model and serial number. For soft goods
kits with elastomers other than those listed,
contact Anderson Greenwood or an authorized
representative.