100-214-294 REV. 05 33
6.2.3 Cleaning Items (Treating Samples)
NOTICE
To stop ultrasonics at any time, turn the Timer Knob to the zero
position.
Table 6.4 Treating Samples
Step Action
1 Turn Main Power switch on.
2
Turn the Timer Knob clockwise to set the amount of time (0 - 60 minutes)
you wish the items to be cleaned. Turn the Timer Knob counterclockwise to
the Hold position for continuous operation.
3
Place the items into a basket, perforated tray, or beakers in a positioning
cover.
4
If using beakers or a solid tray, add cleaning solution to beakers or tray to
cover the items.
5
Slowly lower the tray or beakers into the tank. Do not allow items to
contact the tank bottom.
6 When items are clean, slowly remove them from the tank.
7 Rinse the clean items with clean water and dry them, if necessary.
To Next Page
Loading...