EasyManua.ls Logo

Emerson Branson CPX5800H - Table 6.12 Degassing Your CPX Series Unit

Emerson Branson CPX5800H
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 100-214-294 REV. 05
6.4.3 Degassing
For initial cleaning solution degassing.
Sonics On
Indicates sonics are active.
If running in Timed Mode, ultrasonics will remain on until the timer
reaches 0 minutes.
In Constant Sonics Mode, ultrasonics will remain on until the Sonics
key is pressed or the unit is turned off.
Degas On
Indicates the unit is in Degas Mode.
In Degas Mode, degassing will continue until the timer reaches 0
minutes.
NOTICE
Refer to 6.5.11 Solution for information on degassing.
Alarm
Alarm Bell icon flashes when the unit encounters an abnormal
operating condition.
NOTICE
Refer to 7.2 Troubleshooting for information on troubleshooting.
Table 6.11 CPX Series LCD description.
Reference Function
NOTICE
To stop degassing at any time, press the Degas key.
Table 6.12 Degassing your CPX Series unit
Step Action
1 Turn Main Power switch on.
2 Press the On/Standby key to turn on the unit.
3
Press Degas key once to start the degas process.
Default degas time is 5 minutes.
If necessary, use Up/Down keys to alter degas time during a degas cycle.
NOTICE
Refer to 6.5.11 Solution for information on degassing.

Table of Contents

Related product manuals