Emerson Builder CF700BS09 - User Manual

Part No. F40BP73120004 Form No. BP7312-4
Revision: 150226 U.L. Model No.: 52-ANT
READ AND SAVE THESE INSTRUCTIONS
Net Weight: 14.4 Lbs.
Questions, problems, missing parts: Before returning to the store call
Emerson Electric Customer Service
8 a.m. - 6 p.m., Eastern, Monday-Friday
1-800-654-3545
www.emersonfans.com
BUILDER Series
52” Ceiling Fan Owner's Manual
CF700BS09
- Brushed Steel
CF700ORB09 - Oil Rubbed Bronze
CF700WW09 - Appliance White
Model Numbers
• Español - página 25
• Français - page 49

Emerson Builder CF700BS09 Specifications

General

Brand	Emerson
Model	Builder CF700BS09
Category	Fan
Language	English

Summary

Safety Instructions

General Safety Precautions

Key safety guidelines for operating the fan, including power, cleaning, and blade handling.

Installation Safety Precautions

Critical safety steps for fan installation to prevent electrical hazards and ensure secure mounting.

Unpacking Instructions

Check Package Contents

Verify all parts are received before starting assembly, referring to illustrations.

Prepare Fan Assembly for Mounting

Initial steps for preparing the fan motor assembly, including removing protective bags.

Electrical Requirements

Ceiling Fan Assembly

Disconnect Power and Prepare Mounting Plate

Ensure power is off before attaching the mounting plate to the outlet box.

Route Motor Leads Through Ceiling Cover

Guide the three 42" motor leads through the ceiling cover opening.

Route Motor Leads Through Hanger Ball;Downrod

Thread the motor leads through the hanger ball and downrod assembly.

Secure Hanger Ball;Downrod Assembly

Tighten setscrews to securely fasten the downrod assembly to the motor coupling.

Prepare Motor Leads for Wiring

Measure, cut, and strip motor leads approximately 6-9 inches above the hanger ball.

Prepare Fan for Blade Attachment

Remove shipping spacers and attachment screws from the motor before blade installation.

Mount Blade Flanges to Fan Blades

Attach blade flanges to fan blades using three M5 x 6mm screws per blade.

Attach Blade Assemblies to Motor Hub

Secure blade assemblies to the motor hub using M6 x 12mm screws with lockwashers.

Connect Switch Housing Assembly

Engage the switch housing connector with the motor connector, ensuring proper mating.

Secure Switch Housing Assembly

Position and secure the switch housing assembly to the switch housing plate.

How to Hang Your Ceiling Fan

Ensure Minimum Ceiling Clearance

Fan must be hung with at least 7 feet of clearance from floor to blades.

Secure Hanger Bracket to Outlet Box

Firmly attach the hanger bracket to the outlet box using the provided screws.

Seat Hanger Ball in Hanger Bracket

Carefully lift and seat the hanger ball assembly into the hanger bracket groove.

How to Wire Your Ceiling Fan

Connect Grounding Wires

Connect green grounding leads from hanger ball/bracket to the supply ground conductor.

Connect White (Neutral) Wires

Connect the fan motor white wire to the supply white (neutral) wire.

Connect Black (Hot) and Blue Wires

Connect fan motor black and blue wires to the supply black (hot) wire.

Route Wires into Outlet Box

Push connected wires carefully into the outlet box, separating colors.

Install Threaded Studs for Ceiling Cover

Screw the two threaded studs into the tapped holes in the hanger bracket.

Secure Ceiling Cover

Attach the ceiling cover using lockwashers and knurled knobs.

Using Your Ceiling Fan

Adjust Fan Reversing Switch

Change switch position to the 'left' (downward) or 'right' (upward) for airflow.

Operate 3-Speed Pull Chain

Control fan speed (High, Medium, Low, Off) by pulling the chain.

Maintenance

Accessories

Repair Parts

Diagram of Repair Parts

Visual representation of fan components and parts for identification.

Repair Parts Listing

Detailed list of parts with key numbers and compatibility across model numbers.

How to Order Repair Parts

Information required when ordering replacement parts, including part number and model number.

Trouble Shooting

Fan Will Not Start

Common causes and suggested remedies for a fan that fails to operate.

Fan Sounds Noisy

Diagnosing and fixing common causes of fan noise, such as loose parts.

Fan Wobbles or Shakes Excessively

Troubleshooting common causes of excessive fan wobble and shaking.

Energy Efficient Use of Ceiling Fans

Choosing Appropriate Mounting Location

Tips for selecting the best position for optimal airflow and energy efficiency.

Using the Ceiling Fan Year Round

Seasonal operation tips for energy savings, including reverse airflow.

Turn Off When Not in Room

Reminder to conserve energy by turning off the fan when the room is unoccupied.

Emerson Air Comfort Ceiling Fan Limited Warranty

What the Limited Warranty Covers

Details on components and duration covered by the limited warranty.

Warranty Exclusions and Limitations

Specifies items and conditions not covered by the limited warranty.

How to Receive Warranty Service

Procedures for obtaining warranty repairs, replacements, or refunds.