© 2017 Emerson Climate Technologies, Inc.
BURN HAZARD
• Do not touch the compressor until it has cooled down.
• Ensure that materials and wiring do not touch high temperature areas of
the compressor.
• Use caution when brazing system components.
• Personal safety equipment must be used.
• Failure to follow these warnings could result in serious personal injury or
property damage.
R290 MIXTURE IN POTENTIALLY EXPLOSIVE ATMOSPHERE
• R290 mixed with air can create an explosive atmosphere.
• Immediately stop the compressor and ventilate the room if an explosive
atmosphere is detected.
• No open flame is allowed.
COMPRESSOR HANDLING
• Use the appropriate lifting devices to move compressors.
• Personal safety equipment must be used.
• Failure to follow these warnings could result in personal injury or
property damage.
Safety Statements
• Refrigerant compressors must be employed only for their intended use.
• Only qualified and authorized HVAC or refrigeration personnel are permitted to install commission and
maintain this equipment.
• Electrical connections must be made by qualified electrical personnel.
• All valid standards and codes for installing, servicing, and maintaining electrical and
refrigeration equipment must be observed.
To Next Page
Loading...
