Emerson Dixell IEV22D User Manual

1592026260 IEV22-24D GB r.1.0 21.02.2019 IEV 16/60
Parameter displayed also in Pr2
3.10 How to modify the parameters
Proceed as follows to access the programming area of the parameters displayed in Pr1:
• press SET and simultaneously for 5 seconds
• press to view the parameter that is to be modified
• press SET
• press to modify the value of the parameter
• press SET to confirm the value and move on to the next parameter
• repeat the above steps to modify the other parameters
• press SET and simultaneously to exit from the programming area of the parameters
Proceed as follows to access the programming area of the parameters displayed in Pr2:
• press SET and simultaneously for 5 seconds
• press to view the password Pr2 parameter (last parameter on the list)
• press SET
• press to enter the value of the current password
• press SET to confirm the value
• parameter Et01 will be displayed once again (in this case the parameters of level Pr2 are
displayed)
• press to view the desired parameter
• press SET if the parameter must be modified
• press to enter the new value
• press SET to confirm the value
• press SET and simultaneously to exit from the programming area of the parameters

Emerson Dixell IEV22D Specifications

General

Brand	Emerson
Model	Dixell IEV22D
Category	Controller
Language	English