Need help?Do you have a question about the Emerson Dixell XC15CX and is the answer not in the manual?
General| Model | XC15CX |
|---|---|
| Series | Dixell |
| Resolution | 0.1 °C |
| Buzzer | Yes |
| Protection | IP20 |
| Accuracy | ±0.5 °C |
| Output | Relay |
| Protection Rating | IP20 |
| Type | Controller |
| Relative Humidity | 20% to 90% non-condensing |
| Display | LCD |
| Analog Inputs | 1 |
| Relay Outputs | 2 |
| Serial Communication | RS485 |
| Input | NTC |
Manual is integral part, keep near device. Use as described. Not a safety device. Check application limits.
Separate cables, do not exceed current limits, use contactors for higher current.
Diagrams for high voltage models (110/230VAC).
Procedure to set pressure probe range (P1i, P1E, P2i, P2E).
Explanation of the function of each button (SET, UP, DOWN).
Table of available alarm codes and their meanings.
Procedure to modify setpoint values (St1, St2).
How to navigate and view logged alarm events and their durations.
To Next Page