Emerson El-O-Matic E Series - Page 6

Page 6
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
DOC.41.EDN Rev: E
March 2012
TM
Action
ED or PD = Double acting ES or PS = Single acting (Spring return)
Actuator type
E-series
0012 = E12 0025 = E25 0040 = E40 0065 = E65 0100 = E100 0150 = E150
0200 = E200 0350 = E 350 0600 = E600 0950 = E950 1600 = E1600
P-series
2500 = P2500 4000 = P4000
Valve ange Finish
Metric Metric UNC/NPT
ISO 5211 DIN 3337 ISO 5211
M = D = U = Standard
N = E = V = CSR coating + Aluminum pinion
O = F = W = CSR coating + Stainless Steel pinion
Limit stops
0 = No limit stops Standard on P-series
1 = L1 limit stops Standard on E-Series
2 = Double Stroke Adjustment Standard on DSA-Series
Assembly codes Rotation Mounting
A = Spring to close clock wise in line with pipeline
B = Spring to close clock wise across pipeline
C = Spring to open counter clock wise across pipeline
D = Spring to open counter clock wise in line with pipeline
Spring set E-Serie Spring set P-serie
00 = Double acting actuator 00 = Double acting actuator
01 = Springset 1 04 = Springset 4
02 = Springset 2 06 = Springset 6
03 = Springset 3 08 = Springset 8
04 = Springset 4 10 = Springset 10
05 = Springset 5 12 = Springset 12
06 = Springset 6 14 = Springset 14
Future expansion
A = Standard
Insert size (in mm.)
(1
E12 E25 E40 E65 E100 E150 E200
- ISO or UNC 00 11 14 14 19 19 22
- DIN 00 11 14 14 17 17 22
E 350 E600 E950 E1600 P2500 P4000
- ISO or UNC 27 27 36 46 00 00
- DIN 22 27 36 46 00 00
Visual Indication Code
D = Disk K = Knob N = No visual indication
Temperature range
0 = Standard TS: 80°C (176°F) / -20°C ( -4°F)
1 = High temp TS: 120°C (248°F) / -20°C ( -4°F)
2 = Low temp TS: 80°C (176°F) / -40°C (-40°F)
1.2 Product code
ES 0040.M 1 A 05 A.14 N 1
(1
Actuators E12, P2500 and P4000 have no inserts. They have have a inner square directly in the pinion
180° actuators are not covered by this conguration matrix.