9
CALLER ID SYSTEM
This telepphone automatically displays an incoming caller’s name and telephone number
together with the date and time of the call. It records up to 60 calls and stores the data in
Memory.
IMPORTANT: You must subscribe to the Caller ID service from your local telephone
company to utilize this feature.
VIEWING THE CALLER ID LIST
You can look through the data (calls) in the Caller ID list to check the numbers and names
of the calls received.
1. Press the down button to view your calls from the newest call.
2. Press the up button to view calls from older calls to newer ones.
NOTE: When the batteries are weak, the low battery indicator is displayed. Change
the batteries as soon as possible; otherwise the Caller ID list may be erased.
CALLING BACK FROM THE CALLER ID LIST
1. Display the phone number you want to call back using the up or down button.
2. Press the dial/menu button.
3. Pick up the handset or press the speaker button, the phone will dial the number
displayed.
STORING THE PHONE NUMBERS FROM THE CALLER ID LIST
1. Display the phone number you want to store.
2. Press the store button
3.
DELETING THE DATA FROM THE CALLER ID LIST
To delete the Caller ID memory one by one
1. Display the call
’
you want to delete.
2. Press the delete button, the display will show “DELETE CALL?”, press the delete
button once more, the display changes to show the next or previous call, and the data is
deleted.
To delete ALL the Caller ID memories
1. When the phone is not in use, press the delete button and hold for 3 seconds, the
display shows “DELETE ALL?”
2. Press the delete button once more, the display changes to “NO CALLS” and all the
Caller ID memories (including the new call memories) are deleted.
For (3) one-touch dialing: For (10) two-touch dialing:
Press one of the 3 one-touch
speed dial buttons (M1 to M3).
Press the memo button, and then press one of
the speed dial memories (0 to 9).
To Next Page
Loading...
