8
PAUSE FUNCTION
Example: In an office where you need to dial a 9 first to get an outside line.
Dial the number 9 and press the redial button, and then dial the phone number. You will
see a “P” displayed for pause. You may also store this into memory.
STORING PHONE NUMBERS INTO MEMORY
4. The stored number and the location will be shown in the display.
5. Repeat steps 1 to 4 to store numbers into other memory locations.
NOTE: When the batteries are dead or removed for more than five minutes, the stored
numbers may be erased.
MEMORY DIALING
1. Pick up the handset or press the speaker button.
1. Press the store button, “Store Number” will be shown in the display. .
2. Dial the phone number you want to store.
2.
3. The phone will dial the number you stored into that memory.
BOOK
To store phone numbers in your telephone’s Phone Book:
1. Press the book button.
2. Use the up or down buttons to choose “ADD”.
3. Press the book button to confirm.
4. Enter the information using the keypad and the up/down buttons, and press the book
button to confirm.
To look up stored phone numbers:
1. Press the book button.
2. Choose “SEARCH” and press the book button.
2. Use the up/down buttons to search entries.
NOTE: To delete an entry, press the delete button twice.
For (3) one-touch dialing: For (10) two-touch dialing:
Press one of the 3 one-touch
speed dial buttons (M1 to M3).
Press the memo button, and then press one of
the dialing keys (0 to 9).
3. For (3) one-touch dialing: For (10) two-touch dialing:
Press one of the 3 one-touch
speed dial buttons (M1 to M3).
Press the memo button, and then press one of
the dialing keys (0 to 9) to store a phone number in.
To Next Page
Loading...
