Emerson EWC19T2 - Change Access Code; Mpaa Rating Set up

- 22 - EN
1C29
4 Select your desired item
Press the Arrow K or L button to
point to your desired item.
Then, press the Arrow
B button to
select [BLOCK] or [VIEW].
•
When you select the rating cate-
gory and turn it [BLOCK], the higher rating will
turn [BLOCK] automatically. Also, the lower rat-
ing will turn [VIEW] automatically.
•
When you turn “G” to [VIEW], the all ratings will
turn to [VIEW] automatically.
5 Exit the V-Chip setting mode
Press the SETUP button on the remote control to
return to original mode.
MPAA RATING SET UP
Make sure ...
•
TV/DVD/VHS power must be turned on.
1 Select “V-CHIP SET UP”
Press the SETUP button on the
remote control.
Press the Arrow
K or L button to
point to “V-CHIP SET UP”.
Then, press the Arrow
B button.
2
Use the number buttons to enter 4-
digit access code. The default code
is 0000.
3 Select “MPAA RATING”
Press the Arrow K or L button to
point to “MPAA RATING”.
Then, press the Arrow
B button.
Selection Rating Category Explanations
G General Audience
PG Parental Guidance suggested.
PG-13 Unsuitable for children under 13
R Restricted; under 17 requires accompa-
nying parent or adult guardian
NC-17 No one under 17 admitted
X Mature audience only
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– V-CHIP SET UP –
TV RATING
B MPAA RATING
CHANGE CODE
G [VIEW]
PG [VIEW]
PG–13 [VIEW]
B R [BLOCK]
NC–17 [BLOCK]
X [BLOCK]
ACCESS CODE
_ _ _ _
CHANGE ACCESS CODE
To change access code, follow the steps.
1
Press the SETUP button so that the TV/VCR SETUP
display appears on the TV screen.
2
Press the Arrow K or L button to
point to "V-CHIP SET UP". Then,
press the Arrow B button.
3
Use the number buttons to enter 4-
digit access code. The default code
is 0000.
4
Press the Arrow K or L button to
point to "CHANGE CODE". Then,
press the Arrow B button.
5
Use the number buttons to enter
your desired access code in the
NEW CODE space. Then enter the
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.
•
If you enter wrong code, repeat
step 5, making sure you enter the
same new code exactly in the
confirm code space.
6
Press the SETUP button to exit the TV/VCR SETUP.
Note:
•
If you unplug the power code or power failure
occures, the changed access code will be lost and
will return to default (0000). Change your access
code again as necessary.
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
ACCESS CODE
_ _ _ _
– V-CHIP SET UP –
TV RATING
MPAA RATING
B CHANGE CODE
NEW CODE
_ _ _ _
CONFIRM CODE
_ _ _ _
NEW CODE
X X X X
CONFIRM CODE
_ _ _ _
TD503_01-36 02.2.26 10:10 AM Page 22