Emerson EWC19T2 - C Changing the Setup Items; Language Settings

–
47
–
EN
01A11
1 Press the SETUP button in STOP mode.
¡The setup screen appears.
2 Press the K/L buttons to select Language,
and then press the ENTER button.
3 Press the K/L buttons to select an item,
and then press the ENTER button.
AUDIO:
(Voice is played back in selected language.)
SUBTITLE:
(Subtitles are shown in selected language.)
DISCMENU:
(The disc menu appears in selected language.)
4 Press the K/L buttons to select a desired
item, and then press the ENTER button.
¡If “OTHER” is selected on the AUDIO, SUBTITLE
or DISC MENU setting screen, the Language Code
setting screen will appear. Press the numeric buttons
to enter the desired language code while referring to
the list on page 51.
5 Press the SETUP button.
¡The setup mode will be canceled and the ordinary
screen will appear.
Note
¡Be sure to press the SETUP button, or the setting
will not work.
¡Language Setting for Audio and Subtitle is not avail-
able with some discs. Then use the Audio and
Subtitle button. Details are on pages 44 and 45.
¡You can also select the item by pressing the numbers
which displayed with the item.
¡When you change the setup items, press the STOP
button if you are in playback mode.
CHANGING THE SETUP ITEMS
LANGUAGE SETTINGS
1. LANGUAGE
2. DISPLAY
3. AUDIO
4. PARENTAL
SET-UP
EXIT : SETUP CANCEL : RETURN
SELECT: / SET : ENTER
Please enter a 4-digit Language code.
- - - -
SET-UP
LANGUAGE CONTROLS
DISC MENU
LANGUAGE CODE
1. LANGUAGE
2. DISPLAY
3. AUDIO
4. PARENTAL
SET-UP
1. AUDIO ORIGINAL
2. SUBTITLE OFF
3. DISC MENU ORIGINAL
SET-UP
LANGUAGE CONTROLS
1. AUDIO ORIGINAL
2. SUBTITLE OFF
3. DISC MENU ORIGINAL
SET-UP
LANGUAGE CONTROLS
1. AUDIO ORIGINAL
2. SUBTITLE OFF
3. DISC MENU ORIGINAL
SET-UP
LANGUAGE CONTROLS
TD503_36-55 02.2.26 10:13 AM Page 47