Emerson EWD2004OM Supplement Service Manual

1-6-1 H9600DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1): Identification (location) No. of parts in the figures
(2): Name of the part
(3): Figure Number for reference
(4): Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P=Spring, L=Locking Tab, S=Screw,
CN=Connector
*=Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5): Refer to “Reference Notes.”
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Note
[1] Top Case D1 4(S-1) -
[2]
Front
Assembly
D2 *3(L-1), *3(L-2)
1
1-1
1-2
[3]
To p
Bracket
D2 3(S-2) -
[4]
DVD
Mecha
Assembly
D3
4(S-3), *CN401,
*CN601
-
[5]
Partition
Plate
D3 2(S-4) -
[6]
Loader
Holder
D3 2(S-5) -
[1] Top Case
[2] Front Assembly
[3] Top Bracket
[4] DVD Mecha Assembly [7] DVD Main CBA Unit
[5] Partition Plate
[6] Loader Holder
[8] VCR Chassis Unit
[9] Deck Assembly
[10] DVD Open/Close CBA
[11] Main CBA
[7]
DVD Main
CBA Unit
D4
(S-6), *CN201,
*CN301
2
2-1
2-2
3
[8]
VCR
Chassis
Unit
D5 5(S-7), (S-8) -
[9]
Deck
Assembly
D6
Desolder,
(S-9), (S-10), (S-11)
4,5
[10]
DVD
Open/
Close
CBA
D6 Desolder -
[11] Main CBA D6 ---------- -
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Note

Emerson EWD2004OM Specifications

General

Brand	Emerson
Model	EWD2004OM
Category	DVD Player
Language	English