Emerson EWFG2705 - Page 31

31
EN
1
Select digital mode by pressing [DTV/TV].
2
Display the MENU screen.
• Press
[MENU] on the remote control.
The following MENU screen is displayed.
3 Select "CHANNEL SET".
• Using
[CH
K
/
L
] on the remote control, select
"CHANNEL SET".
• Press [VOL
X
] on the remote control.
4 Select "ADD/DELETE(DTV)".
• Using
[CH
K
/
L
] on the remote control, select
"ADD/DELETE(DTV)".
• Press
[VOL
X
] on the remote control.
5
Select the channel you want to add or delete.
• Using
[CH
K
/
L
] or Channel number buttons
on the remote control, select the channel.
• Select ADD or DELETE with
[VOL
X
/
Y
] on the
remote control.
• Color of channel numbers displayed at the right
top of the screen
Blue/Green: The selected channel will be added.
Pink/Red: The selected channel will be deleted.
D12
ADD/DELETE:DTV
ADD/DELETE(DTV)
AUTO PRESET CH(DTV)
AUTO PRESET CH(DTV/TV)
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
DTV
OTHER SETTING
6 To exit the menu, press [MENU] on the remote
control.
NOTES:
• The menu will disappear automatically after about 10 sec-
onds.
• In the digital mode (DTV), you can add or delete channels
only for Major channel.