Emerson Fisher C1 - Page 50

Instruction Manual
D103292X012
C1 Controllers and Transmitters
March 2017
50
Mounting Parts for Panel, Wall,
Pipestand, or Fisher Actuator
Mounting (figures 2 and 3)
Key Description
213 Mounting Plate, steel
For yoke mounting on
470, 472, 513, 656, 657 and 667
For yoke mounting on 480
Vertical
For yoke mounting on 1051 and 1052
Size 40, positions 1 and 3 w/switch and
Size 60, position 1 w/switch
All others
213 Mounting Plate, steel (continued)
For yoke mounting on 1061 Size 30,
positions 1 and 3 w/switch and position 1 w/o
switch, Size 40, position 1 w/switch and
Sizes 80 and 100, position 3 w/o switch
All others
For pipe stand mounting
215 Machine Screw, steel pl (specify quantity req'd)
5/16 UNC X 1 inch
5/16 UNC X 1-1/2 inches
5/16 UNC X 2 inches
216 Hex Nut, steel pl (specify quantity req'd)
For filter regulator mounting on
1051, 1052 and 1061
All other types and mountings
220 Mounting Bracket, steel pl (not shown)
For casing mounting and casing-mounted filter
regulator on 1051 and 1052
221 Lockwasher, steel pl (specify quantity req'd)
222 Cap Screw, steel pl (specify quantity req'd)
5/16 UNC X 3/4 inch
5/16 UNC X 1 inch
5/16 UNC X 1-1/8 inches
5/16 UNC X 1-1/4 inches
5/16 UNC X 1-3/4 inches
5/16 UNC X 2-1/2 inches
3/8 UNF X 1-1/8 inches
223 Cap Screw, steel pl
1051 and 1052 with either case or
yoke mounted regulator and 1061
with yoke mounted regulator (2 req'd)
228 Spacer Spool, steel (specify quantity req'd)
470, 472, 480, 513, 656, 657, 667,
pipe stand 1051, 1052 and 1061
Key Description
229 Cap Screw, steel pl (not shown) (specify quantity req'd)
1051 and 1052 casing-mounted
controller
238 Mounting Plate, steel
For yoke-mounted filter regulator
1051, 1052 and 1062 sizes 40 and 60
1061 size 30
240 Cap Screw, steel
For yoke-mounted filter regulator on
1051 and 1052 sizes 40 and
60 (2 req'd)
241 Spacer Spool, steel
For yoke mounted filter regulators on
1051 and 1052 sizes 40 and 60 (2 req'd)
242 Spacer Spool, steel (not shown)
For yoke mounting on
1051 and 1052 size 40 (2 req'd)
1061 sizes 30, 80 and 100 (2 req'd)
243 Street Elbow, pl galvanized malleable iron (not shown)
For mounting on 470, 472, 480, 513, 656,
657, 667, panel, pipe stand, 1051, 1052 and 1061
w/nipple-mounted filter regulator
244 Pipe Nipple, pl galvanized steel (not shown)
For mounting on 470, 472, 480, 513, 656,
657, panel, pipe stand, 1051, 1052 and 1061
w/nipple-mounted filter regulator
250 Clamp, Steel
For pipe stand mounting (2 req'd)
251 Bracket Assembly, steel
For panel or wall mounting (2 req'd)
252 Cap Screw, steel pl
For panel or wall mounting (4 req'd)
Note
Specify quantity of fittings.
Connector, Brass
1/4 NPT X 1/4 O.D. tubing
1/4 NPT X 3/8 O.D. tubing
Elbow, Brass
1/4 NPT X 1/4 O.D. tubing
1/4 NPT X 3/8 O.D. Tubing