DVC2000 Digital Valve Controller
July 2009
Index-4
Internal voltage reference failure, Self Test
Failure, enabling to cause instrument
shutdown, 4-12
Intrinsically Safe installation, 2-11
ISA Standard 7.0.01, 2-10
K
Keypad, Field Communicator, B-2
L
Language Pack Options, 3-3
Language Screen, via Local Interface, 3-3
Language Selection Screen, 3-3
LCD, First (Home) Screen, 3-2
Limit Switches, 1-5
OFF State, 1-5
ON State, 1-5
Supply Voltage, 1-5
Wiring, 2-11
Local Control, via Local Interface, 3-12
Local Interface, 1-2
Local Interface Flow Chart, ii
Loop Schematics
Intrinsic Safety
ATEX, C-3
CSA, C-1
FM, C-2
Intrinsically Safe, IECEx, C-4
LUI Language, 4-6
LUI Pressure Units, 4-7
M
magnet array, 2-4, 2-7
Magnet Assemblies, 2-5
Magnet Assembly, 1-2
Magnetic Feedback Assembly, Replacing, 6-3
Main Elec Rev, 5-3
Main Electronics
Installation, 6-4
Removal, 6-4
Replacing, 6-4
Main Electronics Revision, 5-3
Manual Calibrate Travel, 4-14
Materials of Construction, DVC2000, 1-5
Maximum Supply Pressure, 4-7
Maximum Voltage, 1-4
Measured Variable Units and Ranges, 4-6
Message, 4-6
Minimum Closing Time, 4-9
Minimum Control Current, 1-4
Minimum Opening Time, 4-8
Minimum Voltage, 1-4
Mounting, 2-3
657 Actuator, 2-5
667 Actuator, 2-5
Air-to-Open Sliding-Stem (Linear)
Actuators, 2-5
Guidelines for Mounting on Quarter-Turn
(Rotary) Actuators, 2-9
GX Actuators, 2-6
Sliding-Stem (Linear) Actuators, 2-5
Specifications, 1-5
N
Nameplates
ATEX Approval, Intrinsic Safety, C-3
CSA Approval, C-2
FM Approval, C-2
IECEx Approval, Intrinsic Safety, C-4
NAMUR mounting standards, 1-4
NEPSI
Hazardous Area Classification, 1-4
Notes for Safe Use of the Certified
Product, 2-3
No Free Time, 4-12, 5-4
Self Test Failure, enabling to cause
instrument shutdown, 4-12
Non-critical NVM Alert, 5-3
O
Offline/Failed, 5-4
Operational Status, 5-4
Options Board, 1-2
Options Boards, 2-11
Other Alerts, 4-11
C
Index
To Next Page
Loading...
