Emerson Fisher Fieldvue DVC6010f User Manual

Parts
March 2006
11-5
Key Description Part Number
For DVC6010f, DVC6015, DVC6030f, and
DVC6035
46 Alignment Pin
(5)
78 Bias Spring, SST
(2)
79 Feedback Arm,
304 SST
For DVC6010 and DVC6015 37B5270X042
For DVC6030 and DVC6035 34B2179X022
316 SST
For DVC6010S 37B5270X052
For DVC6030S 34B2179X042
104 Cap Screw, hex hd (4 req’d)
DVC6010 and DVC6015 only 1A3917X0072
Not for mounting on 1250 and 1250R actuators.
Mounting parts for 1250 and 1250R actuators are
included in the mounting kit for these actuators.
DVC6010S only, SST (oversized) (4 req’d) 1A4116X0012
Not for mounting on 1250 and 1250R actuators.
107 Mounting Bracket DVC6010 and DVC6015 only
(4)
Not for mounting on 1250 and 1250R actuators.
Mounting parts for 1250 and 1250R actuators are
included in the mounting kit for these actuators.
- - - Feedback Linkage Shield, see figures 2-1 and 2-2
Up to 50.4 mm (2-inch) travel
All sliding-stem actuators except 585C size 60 39B2268X012
50.4 mm (2-inch) to 104mm (4-inch) travel
All sliding-stem actuators except 585C size 60 49B2267X012
Type 585C size 60, 19 mm (3/4-inch) to
104mm (4-inch) travel 49B3844X012
Key Description Part Number
For DVC6020f and DVC6025
82 Bias Spring, SST
(3)
83 Flange Bearing, Rulon
(3)
(2 req’d)
84 Feedback Arm Assy, SST
(3)
85 E-ring, pl stl
(3
) (2 req’d)
86 Plain Washer, pl stl
(3)
(2 req’d)
87 Follower Post, SST
(3)
88 Roller, SST/PTFE
(3)
89 Spring Lock Washer, pl stl
(3)
90 Hex Nut, pl stl
(3)
91 Arm Assy, SST
(3)
92 Cap Screw, hex socket
(3)
(4 req’d)
93 Torsion Spring, Feedback Arm
(3)
11
2. Available in the Small Hardware Spare Parts Kit
3. Available in the DVC6010f to DVC6020f Conversion Kit
4. Available in the DVC6020f to DVC6010f Conversion Kit
5. Available in the Alignment Pin Kit

Emerson Fisher Fieldvue DVC6010f Specifications

General

Brand	Emerson
Model	Fisher Fieldvue DVC6010f
Category	Controller
Language	English