i2P-100 Transducer
Instruction Manual
Form 5777
September 2004
16
Key Description Part Number
Type 585C (470) size 60, 68, 100, and 130 ; Type 657
and 667 size 30, 34, 40, 45, 50, 60, 70, 80 & 87; Type
1051 and 1052 size 40, 60 and 70; Type 1061all sizes
80 Mounting Bracket, steel 3P426825022
81 Washer, steel pl (4 req’d) 1B865928982
82 Cap Screw, steel pl (4 req’d) 1A381624052
83 Screw, steel pl (2 req’d) 1C870224052
84 Spacer 1K766824092
Casing Mounting
Type 657 and 667 size 30, 34, 40, 45, 50 and 60
80 Mounting Bracket, steel 1F401225072
81 Washer, steel pl (2 req’d) 1B865928982
82 Cap Screw, steel pl (2 req’d) 1A381624052
83 Screw (req’d) 1A582824052
Type 657 and 667 size 70
80 Mounting Bracket, steel 1F401225072
81 Washer, steel pl (2 req’d) 1B865928982
82 Cap Screw, steel pl (2 req’d) 1A381624052
83 Screw (req’d) 1A368324052
Key Description Part Number
Type 1051 and 1052 size 20, 33, 40, 60 and 70
80 Mounting Bracket, steel 1F401225072
81 Washer, steel pl (2 req’d) 1B865928982
82 Cap Screw, steel pl (2 req’d) 1A381624052
83 Screw (req’d) 1A582824052
Type 1250 and 1250R all sizes
80 Mounting Bracket, steel 30B1265X022
81 Washer, steel pl (2 req’d) 1B865928982
82 Cap Screw, steel pl (2 req’d) 1A381624052
87 Washer 10B6610X012
91 U-Bolt (2 req’d) 19A7930X012
92 Hex Nut (req’d) 19A4838X012
Pipestand Mounting
80 Mounting Bracket, steel 3P426825022
81 Washer, steel pl (4 req’d) 1B865928982
82 Cap Screw, steel pl (2 req’d) 1A381624052
88 Pipe Clamp, steel pl 1P427028982
Surface Mounting
80 Mounting Bracket, Steel GE07077X012
82 Cap Screw 1B6098X0012
Fisher
Marshalltown, Iowa 50158 USA
Cernay 68700 France
Sao Paulo 05424 Brazil
Singapore 128461
Emerson Process Management
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are
not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability.
We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Fisher does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and
maintenance of any Fisher product remains solely with the purchaser and end-user.
EFisher Controls International LLC 2004; All Rights Reserved Printed in USA
FlowScanner and Fisher are marks owned by Fisher Controls International LLC, a member of the Emerson Process Management business division
of Emerson Electric Co. The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their
respective owners.
N97
To Previous Page
Loading...
