Mounting the Unit on your furniture
Screw this Unit on your furniture tightly using a wood screw (Not
Supplied) in the hole at the back of the base as shown.
●
Recommended screw dimension : 3/16 x 3/4 inches (5.1 x 20 mm)
Screw Hole
Rear of this Unit
Note(s)
●
When you remove this Unit make sure to unscrew the wood screw from your Wood
Stand, Furniture and other wood item.
Installing the Remote Control Batteries
1
Slide the battery cover off the back of the Remote Control.
2
Insert 2 Supplied Batteries (AAA, 1.5V). Be sure the + and – ends
of the Batteries line up with the markings inside the case.
3
Slide the cover back into position.
Note(s)
●
Remove the Batteries if not using the Remote Control for an extended period of time.
10 .English
Continued on next page.
To Next Page
Loading...
Need help?
General
