Parental Setting
Parental setting prevents your children from viewing inappropriate
material. (password protected.) Playback will stop if the ratings exceed
the levels you set.
1
In STOP mode, press DVD SETUP and use J K to select
PARENTAL.
2
Use the NUMBER keys to enter your personal 4-digit password,
then press OK.
OK
Please enter a 4-digit password.
PASSWORD
PARENTAL
●
If you have set the password already, use the NUMBER keys to
enter the current 4-digit password.
●
You cannot use the default password (4737) to Play back a DVD.
3
Use H I to select the PARENTAL LEVEL, then press OK.
4
Use H I to select the desired item, then press OK.
PARENTAL LEVEL
ALL
All Parental Locks are cancelled.
8 [ADULT]
All Ratings (Adult / General / Children) can be
Played back.
7 [NC-17] to 2 [G]
Only DVD intended for general use and children
can be Played back.
1 [KID SAFE]
Only DVD intended for children can be Played
back.
To change the password
5
At step 3, use H I to select PASSWORD CHANGE then press
OK.
6
Use the NUMBER keys to enter the new 4-digit password.
Note(s)
●
DVD-video may not respond to Parental Lock settings. Make sure this function works with
your DVD-video.
●
Record the Password in case you forget it.
●
If you forget the Password, press 4, 7, 3, 7, then enter your New Password. Password will
be cleared and Parental Levels will be set to ALL. Go to step 3 to reset PARENTAL
LEVEL.
●
A Power failure will Not Erase your Password.
Others
You can change the Others functions.
1
In STOP mode, press DVD SETUP and use J K to select
OTHERS.
2
Use H I to select the desired item, then press OK.
OK
ON
AUTO
ON
AUTO POWER OFF
STILL MODE
ANGLE ICON
OTHERS
3
Adjust the following items.
ANGLE ICON
Set to ON to show the Angle Icon when Multiple Camera Angles are
available during DVD Playback.
STILL MODE
Set the Picture quality in the Still mode.
If you select AUTO, it automatically selects the Best Resolution setting
(FIELD or FRAME) based on the Data Characteristics in the Pictures.
FIELD
The picture in the Still mode will be stabilized.
FRAME
The picture in the Still mode will be highly
defined.
AUTO POWER OFF
Set to ON. If there is no operation for 15 minutes, the Unit goes into
Standby Mode.
Reset to the Default Setting
You can Reset All the Settings except for the Parental Setting and On-
screen Menu Language.
1
In STOP mode, press DVD SETUP and use J K to select
INITIALIZE.
2
Use H I to select YES, then press OK.
OK
YES
NO
Initialize?
INITIALIZE
Note(s)
●
When you want to Cancel the Initialization, select NO, then press OK.
33 .English
Continued on next page.
To Next Page
Loading...
Need help?
General
