Picture
Before you begin:
You must set Location to Home. L p. 29
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press TV MENU and use H I to select Picture, then press OK.
18
50
30
30
0
2
USB
Language
Features
Setup
Sound
Picture
Personal
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
2
Use H I J K to select the item you want to adjust, then press
OK.
Auto picture
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Game
and Eco)
When you adjust the following settings, Personal
picture will be set Automatically when Location
is set to Home.
J Cursor Cursor K
Backlight
to Reduce Power
Consumption and
Reduce Backlight
Brightness
to Increase Power
Consumption and
Brightness
Contrast
to Decrease Contrast to Increase Contrast
Brightness
to Decrease Brightness to Increase Brightness
Color
to Decrease Color
Intensity
to Increase Color
Intensity
Tint
to Add Red to Add Green
Sharpness
to Soften to Sharpen
Advanced settings
to Select the desired Setting, then press OK.
(Color alignment, Noise reduction, Black
stretch, Dynamic contrast and Gamma)
●
You can set a Particular Picture Quality using Advanced
settings.
Gamma2
On
On
On
Normal
Gamma
Dynamic contrast
Black stretch
Noise reduction
Color alignment
USB
Language
Features
Setup
Sound
Picture
Color
alignment
Color
temperature
mode
to set the picture color temperature to
Personal (Cool, Normal or Warm)
When you adjust the following
settings, Personal picture will be set
Automatically when Location is set to
Home.
J Cursor Cursor K
Red gain
to Decrease Red
Contrast
to Increase Red
Contrast
Green gain
to Decrease
Green Contrast
to Increase Green
Contrast
Blue gain
to Decrease Blue
Contrast
to Increase Blue
Contrast
Red offset
to Decrease Red
Brightness
to Increase Red
Brightness
Green
offset
to Decrease
Green Brightness
to Increase Green
Brightness
Blue offset
to Decrease Blue
Brightness
to Increase Blue
Brightness
Noise
reduction
Off
to Set Noise reduction to Off
On
to Reduce Noise in an Image
Black stretch
Off
to Set Black stretch to Off
On
to Enhance Black Color
Dynamic
contrast
Off
to Set Dynamic contrast to Off
On
to Enhance Contrast in an Image
Automatically
Gamma
Gamma1
to Change the Gamma setting
(changes the Brightness and Contrast
in the picture)
Gamma2
Gamma3
21 .English
Continued on next page.