Emerson Liebert GXT4-5000RT230 - Page 29

Chapter 7 Operation And Display Panel 21
AUDIBLE ALARM
ON OFF
STARTUP ON BYPASS
YES NO
ENABLE AUTO RESTART
YES NO
GUARANTEE SHUTDOWN
YES
NO
FREQUENCY SELECTION
AUTO - BYPASS ENABLE
AUTO - BYPASS DISABLE
VOLTAGE SELECTION
230
PARALLEL
TYPE 3
ADDRESS 3
Figure 7-9 UPS screen
Press the UP or DOWN button to move the cursor to the required item, and press the ENTER button to confirm the
settings.
2. BATTERY screen
Select Main Menu -> 2 CONFIGURATION -> 2 BATTERY to enter the BATTERY screen. This menu has four
submenus, as shown in Figure 7-10.
EXT BATT CABINET
0 CABINETS
LOW BATTERY TIME
0 2 CABINETS
BATT TEST INTERVAL
2 6 WEEKS
BATT REPLACE TIME
2 0 13 Y 0 8 M 0 8 D
Figure 7-10 BATTERY screen
Press the UP or DOWN button to increase or decrease the value of the settings, and press the ENTER button to
confirm it.
3. OPERATION MODE screen
Select Main Menu -> 2 CONFIGURATION -> 3 OPERATION MODE to enter the OPERATION MODE screen, as
shown in Figure 7-11.
OPERATION MODE
ONLINE MODE
GREEN MODE ON
GREEN MODE AUTO
Figure 7-11 OPERATION MODE screen
Press the UP or DOWN button to move the cursor to the required item, and press the ENTER button to confirm the
settings.
4. LCD screen
Select Main Menu -> 2 CONFIGURATION -> 6 LCD to enter the LCD screen. This menu has two submenus, as
shown in Figure 7-12.
1 LANGUAGE
2 COLOR
Figure 7-12 LCD screen
1) Select ‘1 LANGUAGE’ and press the ENTER button to enter the LANGUAGE screen, as shown in Figure 7-13.
Liebert GXT4 UPS 5000VA ~ 10000VA (230V) User Manual