Emerson Liebert NX 480V - Figure 26 Terminal Details, 33 Battery Power Pack System, Single Cabinet Liebert NX

Installation Drawings
41
Figure 26 Terminal details, 33" battery power pack system, single cabinet Liebert NX
NOTES:
1. All dimensions are in millimeters (inches).
2. All cables should be routed before bolting cabinets together.
3. The cables between the battery cabinet and the UPS cabinet
must be supplied by others.
4. All hardware supplied with battery cabinet for bolting cabinet
to UPS use M6 hardware provided; assemble as shown in
detail drawings.
5. All external wiring is to be in accordance with national
and local electrical codes.
Front
(Without Doors and
Protective Plates)
Top
(Without Protective Plates)
Transformer
For Alber Monitoring
System (Optional)
Fused Input
for Alber Monitoring
System (Optional)
Terminal Block
Aux. Contacts
DETAIL B
PCB
59
(2.32)
(-) Negative
9
(0.30)
76.2
(3)
B
A
(+) Positive
U3819205