EasyManua.ls Logo

Emerson Liebert OpenComms-485 - Liebert Nfinity

Emerson Liebert OpenComms-485
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REV. 5 7/6/2007
Liebert Monitoring Group –Development
4
Liebert Nfinity
Supported Modbus Points
Data Point
Status Coil
# of
Reg.
Scale Notes/ Units
Automatic Battery Test
Enabled
10003 3 1 1
Battery Charger On 10044 1 1
Inverter Ready 10047 1 1
Power Factor Correction
State 10050 1 1
Load On Inverter 10073 1 1
Bypass Active 10074 1 1
Replace Battery 10081 1 1
Battery Under Test 10082 1 1
Load On Battery 10128 1 1
Load On Bypass 10129 1 1
Load On Manual Bypass 10132 1 1
Load Transferred To
Bypass Due To UPS Fault
10134 1 1
Transfer Inhibit 10146 1 1
Output Off Pending 10151 1 1
Low Battery - Shutdown
Imminent 10152 1 1
Output Overload 10154 1 1
UPS Overload 10155 1 1
Output Off 10158 1 1
Check Air Filter - Replace 10170 1 1
Transformer Over
Temperature
10178 1 1
Input Power Supply Fail 10186 1 1
Internal Device
Communication Failure 10284 1 1
Device Active Alarm 10290 1 1
Main Control Warning 10291 1 1
Redundant Control Warning 10292 1 1
Control Module Failure 10293 1 1
Redundant Control Module
Failed 10294 1 1
User Interface Module
Failed 10295 1 1

Related product manuals