Need help?Do you have a question about the Emerson Liebert IntelliSlot IS-WEB485ADPT and is the answer not in the manual?
General| Remote Management | Yes |
|---|---|
| Type | Network Card |
| Compatibility | Liebert UPS |
| Interface | RS-485 |
| Communication Protocol | Modbus RTU |
| Power Supply | Powered by UPS |
| Function | Network Monitoring |
Risk of electric shock and hazard to personnel.
Lists UPS and cooling unit models compatible with the IntelliSlot Web Card family.
Explains how the Web card provides Web management and control for Liebert equipment.
Details default credentials and security for accessing the card's functions.
Enables SNMP management by compiling the Liebert Global Products MIB.
Centralizes alarm notifications for critical system information access.
Integrates with MultiLink software for unattended system shutdown.
Integrates with SiteScan Web software for monitoring trends using Modbus.
Step-by-step guide for installing the non-adapter IntelliSlot Web Card.
Instructions for connecting the serial configuration cable.
Details on using terminal emulation software for initial card configuration.
Guide for installing the IntelliSlot Web/485 Card with adapter.
Steps to connect the serial configuration cable for the adapter version.
Configuration steps for the Web/485 card using terminal emulation.
Provides a roadmap to configuration functions and their corresponding sections.
Detailed steps to connect and configure via serial terminal emulation.
Detailed steps to connect and configure via TCP/IP terminal emulation.
Instructions for accessing configuration through a Telnet connection.
Guide to accessing and configuring the card using a web browser.
Explains how to save configuration changes and reinitialize the card.
Describes optional identification details for the Liebert unit.
Configures network access parameters like IP address, subnet mask, and gateway.
Configures DNS servers for hostname resolution and network access.
Enables/disables SNMP and configures management protocols.
Configures access to the card via the Web interface, including security options.
Details operation modes (HTTP/HTTPS), ports, and site protection.
Guide for installing security certificates for HTTPS with older IE versions.
Guide for installing security certificates for HTTPS with newer IE versions.
Enables or disables Telnet access to the Web card.
Configures time synchronization using SNTP and sets the time zone.
Instructions for changing default administrator and general user credentials.
Resets user credentials back to their factory default settings.
Configures e-mail notifications for events, including sender, recipients, and subject.
Configures SMS text message notifications for events.
Allows customization of message content to include specific event details.
Restores all configuration settings to their original factory defaults.
Configures local node settings when using multiple identical cards in Liebert DS.
Details how to view monitoring data and status of Liebert equipment via the web interface.
Explains how to perform control operations on Liebert equipment using the web interface.
Describes how to view and access the event history of the Web card.
Provides methods to view identifying information for the Web card.
Explains how to view supported events and parameters for the Liebert equipment.
Introduces firmware updates and their benefits for Liebert IntelliSlot cards.
Outlines the general steps involved in the firmware upgrade process.
Provides estimates for download times based on different upgrade methods.
Steps to establish a serial connection using terminal emulation software.
Steps to establish a TCP/IP connection using terminal emulation software.
Instructions for connecting to the card via Telnet.
Instructions for connecting to the card via a web browser.
Lists prerequisites for performing a firmware upgrade.
Guides on identifying the card type and current firmware version.
Instructions for downloading the necessary firmware upgrade file.
Details the process of updating firmware using the HTTP (Web) method.
Step-by-step guide for performing the firmware upgrade via the web interface.
Instructions for updating firmware using TFTP via terminal emulation or Telnet.
Instructions for updating firmware using TFTP via the web interface.
Explains how to update firmware using the Xmodem serial method.
Steps to establish a serial connection using terminal emulation software.
Details how to adjust the communication rate for serial updates.
Finalizes the serial firmware update and resets communication settings.
To Next Page
