Network Settings
25
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To change this setting:
1. Choose IP Network Settings from the Main Menu, then Time (SNTP).
2. Choose SNTP Time Synch Rate, then specify:
• Hourly
•Daily
3. Choose Time Server, then specify the new time server, if desired.
4. Choose Time Zone, select a region from the list and then select a time zone.
Web Interface
To access Time (SNTP) settings through the Web interface:
Click on the Configure tab, then Network Settings in the left panel and finally Edit in the right
panel. After making changes, click Save.
Table 14 Time Server parameters
Parameter Description & Telnet Menus
SNTP Time Sync Rate
This is how often the card will attempt to synchronize its internal clock with the specified
time server.
Time Server
This is the server that will be used for synchronization. This can be either an IP address
or a hostname, provided that the DNS options are configured.
Time Zone
This is the local Time Zone that will be used to correctly adjust the time provided by the
server for the locale where the Web Card is being used.
Click on Edit
to choose
options
Time zones
available
from list
Configure
tab
Time
Server
list
Time
Servers
must be
entered
manually
To Next Page
Loading...
Need help?
General
