Messaging
28
6.0 MESSAGING
The Messaging menu is used to set up e-mail and text message notifications
from the Web card.
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To access these options:
1. Choose Messaging from the Main Menu.
2. Select an option, then use the following guide to make changes.
Web Interface
To access Messaging settings through the Web interface:
• Click on the Configure tab, then Messaging in the left panel and finally Edit in the right panel.
After making changes, click Save.
Table 18 Messaging menu guide
Menu item Refer to:
E-Mail Configuration page 29
SMS Configuration page 30
Customize Messages (E-Mail and SMS) page 32
Messaging Menu
---------------
1: Email 'disabled'
2: SMS 'disabled'
3: Email Configuration
4: SMS Configuration
<ESC>: Cancel menu level
Please select a key ?>
Messaging
Configure tab
Edit
To Next Page
Loading...
Need help?
General
