Network Settings
22
5.4.3 Install Security Certificates - Internet Explorer 7 or later
If you use Internet Explorer 7 or later and select HTTPS as the operation mode of the Web server (see
5.4.1 - Specify Web Server Settings), follow these instructions to install a security certificate.
To do this:
• Open Internet Explorer and enter https:// followed by the IP address or hostname of the Web
card—for example, https://192.168.0.125—in the address bar. The following message appears.
• Click on Continue to this website (not recommended) to open a connection to the Web card.
•Click the Certificate Error box next to the address bar, shown above left.
• In the window that pops up, shown above right, click the View Certificates link. This opens the
Certificate window.
• In the Certificate window, above left, click the Certificate Path tab.
• In the Certificate Path tab, above right, click on Allegro Root CA, then on View Certificate.
Certificate
Error
View
Certificates
View
Certificate
Certificate
Path tab
To Next Page
Loading...
Need help?
General
