6 Mini Maestro User Guide
www.controltechniques.com Issue Number: 5
2 Mechanical Installation
2.1 Dimensions of the drive
Figure 2-1 Overall dimensions of the drive
2.2 Mounting location
The drive is contained on a Eurocard circuit board having a 64-pin DIN connector. Two
installation kits allow for installation as follows:
The ingress protection rating of the drive is IP00. When greater protection is required,
install the drive in a cabinet.
Choose a location that is free from excessive dust, corrosive vapours, gases and all
liquids, including condensation of atmospheric moisture.
Dimensions of the drive
A 100mm 3.937in
B 160mm 6.300in
C 8mm 0.315in
D 41mm 1.614in
Electric shock risk
The heatsink on the drive is LIVE. Switch off the supply and wait at least 10 seconds
before touching any part of the drive.
WARNING
Installation kit Part number Installation
3MB 7500 - 0009 Standard 19 inch rack
2MH 7500 - 0008 Panel mounting
To Next Page
Loading...
