Need help?Do you have a question about the Emerson SP2404 and is the answer not in the manual?
General| Model | SP2404 |
|---|---|
| Type | Servo Drive |
| Control Mode | Torque, Speed, Position |
| Input Voltage | 200-240V AC |
| Output Current | 4A |
| Communication Protocol | Modbus RTU |
| Communication Interface | RS-485 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature |
| Control Method | Sinusoidal PWM control |
Essential information for avoiding hazards and damage to equipment.
Covers high voltages, stored energy, and required personnel competence for safe installation.
Provides detailed current and power ratings for various drive sizes and configurations.
Provides part numbers, specifications, and dimensions for Regen inductors.
Illustrates power and control connections for various regen system configurations.
Provides diagrams for AC and DC power connections and ground connections for various drive sizes.
Covers general EMC requirements, compliance standards, immunity, and emission guidelines.
Details the sequence of events for enabling the regen drive and the steps for commissioning.
Lists and describes fundamental drive parameters including voltage, current, and mode settings.
Details parameters related to the regen sequence, including voltage levels and restart modes.
Covers parameters for managing current magnitude, limits, and reactive current references.
Details parameters for controlling output voltage, power, DC bus voltage, and switching frequency.
Provides information on drive status, alarms, and detailed trip codes and their meanings.
Provides maximum permissible continuous output current ratings with derating for switching frequency and temperature.
Lists trip codes, their meanings, and diagnostic checks required for troubleshooting.
Explains how to access and interpret the drive's trip log, including time stamping.
To Next Page