Need help?Do you have a question about the Emerson SP2403 and is the answer not in the manual?
General| Model | SP2403 |
|---|---|
| Series | SP |
| Type | Servo Drive |
| Input Voltage | 200-240 VAC |
| Output Current | 3 A |
| Control Mode | Position, Speed, Torque |
| Communication Protocol | Modbus RTU |
| Communication Interface | RS-485 |
| Power | 750W |
| Power Rating | 750W |
| Control Method | PWM |
| Protection Features | Overvoltage, Overcurrent, Overtemperature |
Covers warnings, electrical safety, system design, environmental limits, compliance, and parameter adjustment.
Covers sizing factors, power connection diagrams for various regen system configurations.
Covers safety, planning, environmental protection, cooling, and enclosure requirements.
Details electrical safety, isolation, stored charge, and plug/socket considerations.
Covers AC/DC power connections, grounding, and supply requirements.
Details EMC requirements, filter selection, and removal of internal EMC filters.
Details steps for commissioning Regen and motoring drives, including fault handling.
Covers optimizing power feed-forward, current loop gains, voltage control, and current trimming.
Explains how to interpret drive status, alarms, and trip indications for troubleshooting.
To Next Page