Need help?Do you have a question about the Emerson SP1405 and is the answer not in the manual?
General| Brand | Emerson |
|---|---|
| Model | SP1405 |
| Category | Servo Drives |
| Language | English |
Essential information for avoiding hazards, including warnings and cautions.
Warning about severe electrical shock, lethal voltages, and isolation procedures.
Drive integration safety, high voltages, stored energy, and personnel qualifications.
Table detailing continuous output current and power ratings for 200V drives.
Distinguishing between controlled (SPMC) and uncontrolled (SPMU) rectifiers.
Specifications and part numbers for Regen inductors.
Diagram illustrating power connections for single regen systems.
Diagram for multiple motoring systems using Unidrive SPMC.
Diagram for multiple motoring systems with external charging resistor.
Tables showing maximum cable lengths for various drives and frequencies.
Critical safety precautions for mechanical installation.
Detailed specifications for 200V Regen inductors.
Cross-reference table for Schaffner and Epcos EMC filters by drive size.
Method for calculating required enclosure surface area based on heat dissipation.
Critical warnings about high voltages and lethal shock hazards.
Procedures for safely disconnecting power and handling residual voltage.
Diagram illustrating power connections for a size 1 Unidrive SP Regen drive.
Details on grounding connections for different Unidrive SP sizes and types.
Table providing ratings for Unidrive SP sizes 1 to 3.
Overview of EMC requirements and standards.
Guidelines for proper grounding and cable layout for EMC.
Step-by-step guide for commissioning the Regen drive.
Method to reduce transient DC bus voltage effects.
Guidance on setting proportional and integral gains for stability.
Procedure for copying parameters between drive and SMARTCARD.
Parameter controlling access via the drive LED keypad.
PID controller with programmable inputs and outputs.
Parameter for setting the proportional gain (Kp) of the PID controller.
Table of maximum permissible continuous output current vs. switching frequency and temperature.
Requirements for AC supply fusing and protection devices.
DC bus fusing requirements for various regen system configurations.
Detailed specifications for Regen inductors by voltage rating.
Table matching drive models to Schaffner and Epcos EMC filter part numbers.
Calculation of MCB rating for switching frequency filters.
Steps to calculate charging resistor requirements for multi-drive systems.
Categories of drive trip information.
To Next Page
